In a fixed tube-sheet heat exchanger, the shell is rigidly connected to the heat exchange tube. In the operating state, the temperatur...

【More】

 Rubber expansion joints can be divided into two types of Open ArchType Arch and Filled ArchType closed Arch to the middle Arch area, a...

【More】

 The rubber expansion joint consists of three basic parts, the Tube, the Body and the Cover. See figure 4.
 
2.1 tube
 
D...

【More】

 The FSA with ASTM F1123
 
 
 
At present, there is no clear standard basis for rubber expansion joints in China. Th...

【More】

1/ due to the relatively high medium temperature in the flue and hot air ducts, non-metallic expansion joints made of high-temperature res...

【More】

Casing expansion is made up of body tube, telescopic tube, pressure and composition of the seal ring. Casing expansion pipe is mainly used f...

【More】

The filter retractor is an indispensable device for conveying the medium. It is usually installed at the inlet end of a hydraulic control va...

【More】

The retractor (steel retractor) is also called a telescopic joint, an expansion joint, a compensator, and an expansion joint. The retractor ...

【More】

Reducing rubber joints, also known as reducer dampers, pipeline dampers, suspension hoses, soft joints, flexible joints, high pressure joi...

【More】

The sleeve compensator is called a tubular expansion joint and is a compensation device for the hot fluid pipeline. The sleeve compensator i...

【More】

The metal compensator is a type of compensator made of austenitic stainless steel or a material required by the user. Metal compensator has ...

【More】

The corrugated compensator also has a corner and a transverse expansion joint that can be used to compensate for corner deformation and late...

【More】